80% Water Saving CE Certified Industrial Mist Blower for Construction Mining Coal Yard Port Dust Control
This is a dust cannon for the guy who's tired of eating dirt all day. Demolition, quarry work, transfer stations, concrete batch plants – anywhere the air turns brown when the wind picks up. You set this up, point it at the dust cloud, and the cloud stops.
The fan is a cast‑aluminum, direct‑drive unit. No belts to slip, no pulleys to align. The motor is a TEFC industrial motor – sealed against dust and weather. The fan housing is welded steel with a powder coat that doesn't flake off after one season. The guard is heavy wire mesh, big enough to not clog with leaves or trash.
The water system is simple: a strainer, a pump, a pressure regulator, and a ring of brass nozzles. The nozzles are the wide‑bore type – they don't plug up like the fine‑mist nozzles on cheaper units. The mist is coarser, but it travels farther and grabs more dust. You're not making fog – you're making a curtain of water that pulls particles down.
1.Ultra-wide coverage, zero blind spots
Single unit covers up to 10,000 ㎡ with 360° horizontal rotation and ±45° pitch adjustment, 3x larger coverage than traditional sprinklers. No need to move equipment repeatedly for large sites, cuts labor cost by 60% at least.2.95% dust suppression efficiency, no site mess
30-150μm ultra-fine water droplets catch PM2.5/PM10 dust particles directly, suppression rate hits 95%+, way higher than 30% efficiency of regular sprinklers. No excess water pooling on site, won't interrupt your daily production.3.Super cost-saving in long run
Water consumption is only 1/5 of traditional sprinkler trucks, works with recycled water to cut water bill by thousands of dollars per year. Variable frequency model reduces energy consumption by 30%, total operation cost drops 40% compared to old dust control solutions.4.Fits all scenarios, no compatibility issues
Supports 3 installation options: fixed on concrete platform, mounted on transport vehicles, or matched with diesel/gas generator for no-grid areas. Explosion-proof models with IP65 rating are available for coal mines, chemical plants and other high-risk sites.5.Low maintenance, easy to operate
Comes with remote control and automatic mode, can connect to dust concentration sensor to start/stop automatically, no need for full-time operator. IP55 protection grade with overload/overheat protection, CE certified for global export, 1-year full warranty and lifetime after-sales support.








